Product navigation
- PP/PE BAR EXTRUDER
- PVC U type edge sealing unit
- PVC,PU Polyurethane Fire-fighting Water Belt Unit
- PVC, TPV seal strip series extruder
- PVC single screw side strip sealing unit
- PVC Granulator
- PVC profile production unit
- SHR series high speed mixer
- SJSZ conical twin screw extruder
- SJ series single screw extruder
- YF wood plastic gusset set
- Edge embossing machine
- Rewinding machine
- HAUL-OFF MACHINES
- FIVE-ROLLER COOLING MACHINE WITH BLOWER
- Small co-extruder
- COLOR MATCHING MACHINE
Online customer service
WeChat customer service
Scan QRcode
Contact Details
Janny Ni：+86 13861695773
email：[email protected]
Recommended products
PVC, TPV seal strip series extruder
PVC, TPV seal strip series extruder
◆ Technical parameter
| Model | Screw diameter |
Ratio of length to diameter of screw |
Maximum speed of screw |
Extrusion volume |
Motor power |
Central Height |
| SJ-30/25 | φ30 | 25∶1 | 50r/min | ≥15kg/h | 4kw | 1000mm |
| SJ-30/28 | φ30 | 28∶1 | 50r/min | ≥25kg/h | 5.5kw | 1000mm |
| SJ-30/30 | φ30 | 30∶1 | 50r/min | ≥25kg/h | 7.5kw | 1000mm |
| SJ-45/25 | φ45 | 25∶1 | 50r/min | ≥30kg/h | 7.5kw | 1000mm |
| SJ-45/28 | φ45 | 28∶1 | 50r/min | ≥35kg/h | 11kw | 1000mm |
| SJ-45/30 | φ45 | 30∶1 | 50r/min | ≥35kg/h | 15kw | 1000mm |
| SJ-65/25 | φ65 | 25∶1 | 50r/min | ≥80kg/h | 18.5kw | 1000mm |
| SJ-65/28 | φ65 | 28∶1 | 50r/min | ≥80kg/h | 22kw | 1000mm |
| SJ-65/30 | φ65 | 30∶1 | 50r/min | ≥80kg/h | 30kw | 1000mm |
| SJ-90/25 | φ90 | 25∶1 | 50r/min | ≥140kg/h | 30kw | 1000mm |
| SJ-90/30 | φ90 | 28∶1 | 50r/min | ≥140kg/h | 55kw | 1000mm |
| SJ-120/25 | φ120 | 25∶1 | 40r/min | ≥200kg/h | 75kw | 1000mm |
| SJ-150/25 | φ150 | 25∶1 | 40r/min | ≥300kg/h | 110kw | 1000mm |
Recommended reading
-
What are the technical points of extruder?What are the technical points of extruder? 1. During the extrusion process, the material changes fro -
The role of the extruder three functional areasToday small make up to share the role of the extruder three functional areas. Generally, under norma -
Common problems of extruder and the method to deal with screw heatingCommon problems of extruder and the method to deal with screw heating. 1, reamer serious wear. The g -
What do you need to know about extruder?According to the direction of material flow and the included Angle of the center line of the screw, -
Abrasion of feeding roller caused by extruder failureAbrasion of feeding roller caused by extruder failure. As the extruder is made of metal and has high -
Common faults of extruders and abnormal noise in handling methodsAccording to the direction of material flow and the included Angle of the center line of the screw,
